79 cm Cutting Width
A broad cutting width for each mowing pass.

NetEvoTech EvoMo R1

Cover more ground with a 79 cm cutting width for routine mowing.
Turn in place with four-wheel differential steering for precise movement.
Choose remote control or GNSS-RTK navigation to suit your mowing tasks.
A rechargeable LiFePO₄ battery delivers up to 2 hours of mowing per charge.
A 79 cm cutting width, adjustable deck height and twin electric cutting motors help the EvoMo R1 deliver the finish your grounds need.
A broad cutting width for each mowing pass.

Adjust the deck to suit your grass and preferred finish.
Twin electric motors power the cutting system.

Rotating blades cut grass as the mower advances.



Assess slope, ground conditions and site suitability before use.
Four independently driven wheels provide responsive control across varied terrain. Differential steering enables in-place turning, helping the R1 manoeuvre through tight spaces and around your site.

Four 400 W servo motors deliver independently controlled wheel movement.
Turn on the spot to navigate tight spaces and change direction with ease.
With the optional charging station, the compatible R1 automatically returns to recharge when power runs low, then resumes mowing from where it stopped.
*Up to 4,000 m² per charge under suitable conditions.Explore common questions about site suitability, setup and everyday care to help you plan for the R1 on your grounds.
The R1 is designed for routine mowing across lawns, orchards and landscaped grounds. Suitability depends on access, ground conditions and satellite signal coverage, and working slopes must not exceed 20°. Share your site details and photos with our team to help assess suitability.
The R1 uses virtual boundaries, so no perimeter wire is required. During setup, you use the remote controller and SmartNavi app to mark the working area, define no-go zones and save a mowing route. The positioning antenna needs an open location with a clear view of the sky.
Yes, with suitable site planning. Trees, large rocks and other fixed obstacles should be marked as no-go zones during setup. Optional LiDAR supports obstacle detection and stopping or avoidance, but does not replace no-go zone mapping. Remove loose debris before mowing.
Connectivity depends on the configuration. The Network version uses a mobile data connection, while the Radio version supports autonomous mowing without mobile network coverage through its radio link. App registration and some connected functions require internet access. Our team can confirm the requirements for your selected configuration.
The R1 provides up to 2 hours of mowing per charge with its 48 Ah battery. Actual runtime varies with grass conditions, terrain and operating settings.
Automatic return-to-charge and mowing resumption are available on compatible R1 models equipped with the optional charging station. The standard version requires manual charging.
For best results, mow in dry conditions. Wet grass can reduce traction and increase clipping build-up. Do not operate the R1 in heavy rain, thunderstorms or snow.
Inspect the R1 weekly and keep the blades, wheels, cutting deck and charging contacts clean. Switch off the mower before cleaning or maintenance, and do not use a high-pressure washer. Replace worn or damaged blades and screws, and follow the manual’s battery care and storage instructions.
Scroll horizontally to compare all models on smaller screens.
R1: *Mowing efficiency depends on site and grass conditions. Charging station shown is optional.

